Colour Forge Spray: Raven Black (500ml)

The Colour Forge - Raven Black Spray Primer

The Colour Forge Raven Black Spray offers exceptional coverage and quality.

With a proven formula, this product delivers performance comparable to the best in the industry. It provides a smooth, very dark grey-black base coat, offering a slightly softer alternative to pure matt black, excellent for achieving specific highlights or weathered effects.

This spray is colour-matched to Games Workshop's Corvus Black, making it an excellent alternative.

Get more with the generous 500ml spray can – that's 25% more paint than many standard brands!

For the Best Results:

1. Shake Well: Shake the can vigorously for at least 2 minutes to ensure the pigment is fully mixed. You should hear the agitator ball moving freely.

2. Warm Gently: If the can feels cold, stand it in a container of warm (not hot!) water for a few minutes. Keep the water level below the nozzle area. This improves paint flow, especially in cooler conditions.

3. Test Spray: Briefly spray onto a piece of scrap material to ensure an even flow.

4. Apply: Hold the can approximately 15-25 cm (6-10 inches) away from the model. Apply using short, even passes, moving across the model. Aim for thin coats – it's better to apply two thin coats than one thick one. Allow drying time between coats if needed.

5. Clear Nozzle: After use, turn the can upside down and spray for a few seconds until only clear propellant comes out. This helps prevent nozzle blockages for next time.

Safety Information:

• Not suitable for children under 36 months. Keep out of the reach of children.

• Danger! Extremely flammable aerosol. Pressurized container: May burst if heated.

• Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.

• Do not spray on an open flame or other ignition source.

• Do not pierce or burn, even after use. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.

• Causes serious eye irritation. May cause drowsiness or dizziness. Repeated exposure may cause skin dryness or cracking.

• Use only outdoors or in a well-ventilated area. Avoid breathing vapor/spray.

• Wear protective gloves/protective clothing/eye protection/face protection.

• IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.

• Dispose of contents/container in accordance with local regulations.